WOLFGANG ENGINEERING
Inevitable Progress
Inevitable Progress
Here are a few Pictures from some of my customers.
 |
A special set-up with a TB-350 spindle using a outrunner brushless motor on his MaxCN CNC milling machine. |
 |
TB-350 Spindle cutting a wax mold for a ring. |
 |
A custom set-up using a TB-350 spindle on a "Roland" CNC router. |
 |
This customers main purpose for the spindle is to cut PCB's using his "Zenbot" CNC router. He left a detailed review of his experience with the TB-350 Spindle over a Dremel 300. Read review here. |
 |
This customer used the TB-350 spindle to engrave these titanium pendents. They turned out quite nicely, if I do say so myself. |
 |
A couple of panels engraved using the WgE spindle. |
 |
|
 |
Another custom set-up. This customer installed a on-off switch and a variable speed controller. |
 |
Here is how it is mounted on his machine. |
 |
This customer engraved this with a .008" cutter to .030" Deep.
The fonts are 1/8" tall and the diameter of the white piece is 7/8" in diameter.
|
